Installation. - TM-9-2320-366-20-30748

TM 9-2320-366-20-3

7-3. ALTERNATOR BELTS REPLACEMENT (CONT)

b. Installation.

(1) Position two alternator belts (1) on pulley (2).

CAUTION

Tension bracket adjustment varies for new or

reinstalled belts. New belts must be adjusted

to 110-130 lbs (489-478 N), reinstalled belts

must be adjusted to 80-100 lbs (356-444 N).

Failure to comply may result in early belt

failures.

NOTE

Steps (2) and (3) require the aid of an

assistant.

Use square hole in tension bracket to

apply tension to alternator belts.

(2) Push tension bracket (3) down until belt tension gage

indicates correct tension for new or reinstalled belts (1).

(3) Maintain belt tension and tighten two screws (4).

(4) Connect air hose (5) to fan clutch (6).