Water Pump Removal.

TM 9-2320-366-20-3

6-12. WATER PUMP AND FITTINGS REPLACEMENT (CONT)

(5) Disconnect heater supply tube (5) from fitting (6).

(6) Remove 45-degree fitting (6) and preformed packing (7)

from water pump (8). Discard preformed packing.

(7) Loosen two clamps (9).

(8) Remove coolant hose (10) from water pump (8).

(9) Disconnect coolant tubes (11 and 12) from water pump

(8).

NOTE

Note position and size of washers prior to

removal.

(10) Remove two screws (13), washers (14), and drive

belt/tension pulley (15) from engine (16).

(11) Remove water pump drive belt (17) from water pump (8).