Top Radiator Fan Shroud Installation.

TM 9-2320-366-20-3

b. Top Radiator Fan Shroud Installation.

(1) Install coupling (1) in top radiator fan shroud (2) with

washer (3) and nut (4).

WARNING

Adhesives, solvents, and sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. To avoid injury or death,

keep away from open fire and use in a

well-ventilated area. If adhesive, solvent,

or sealing compound gets on skin or

clothing, wash immediately with soap and

water. Failure to comply may result in

injury to personnel.

(2) Apply sealing compound to threads of 90-degree fitting

(5) and fitting (6).

(3) Install fitting (6) in pipe coupling (1).

(4) Install 90-degree fitting (5) in pipe coupling (1).

(5) Position top radiator fan shroud (2) on vehicle.

WARNING

Adhesive sealant MIL-S-46163 can damage

your eyes. Wear safety goggles/glasses

when using; avoid contact with eyes. If

sealant contacts eyes, flush eyes with

water and get immediate medical

attention. Failure to comply may result in

injury to personnel.

(6) Apply sealing compound to threads of screw (7).

(7) Position washer (8) and screw (7) on right side of

radiator fan shroud (2).

(8) Tighten screw (7) to 84-108 lb-in. (10-12 Nm).

(9) Position fan clutch hose (9), clamp (10), six washers

(11), three screws (12) and self-locking nuts (13) on right

side of top radiator fan shroud (2).

(10) Tighten three self-locking nuts (13) to 84-108 lb-in. (10-

12 Nm).

Change 1

6-17