Adjustment. - TM-9-2320-366-20-30623

TM 9-2320-366-20-3

c. Adjustment.

(1) Raise cab (TM 9-2320-366-10-1).

CAUTION

Ensure governor linkage rests against low

idle stop with throttle control cable installed.

Failure to comply may result in damage to

equipment.

NOTE

Perform steps (2) and (3) if governor linkage

does not contact low idle stop with throttle

control cable installed.

(2) Loosen nut (1) on throttle control cable (2) until governor

linkage (3) contacts low idle stop (4).

(3) Tighten nut (5) on throttle control cable (2).

WARNING

Use extreme care when opening cab door

with cab raised. Failure to comply may

result in injury to personnel or damage to

equipment.

CAUTION

Ensure governor linkage contacts high idle stop

with accelerator pedal fully depressed. Failure

to comply may result in damage to equipment.

NOTE

Steps (4) through (7) require the aid of an

assistant.

(4) Depress accelerator pedal (6) to cab floor (7).

4-93