Intake Air Cleaner Assembly Installation (All Models Except M1093/M1094). (cont)

TM 9-2320-366-20-3

4-2. INTAKE AIR CLEANER FILTER ELEMENT, AIR CLEANER ASSEMBLY, AND

PARTICLE EXTRACTION TUBE REPLACEMENT (CONT)

CAUTION

Distance between front edge of air duct and

alternator fan shroud must be no less than

0.5 in. (1.27 cm). Failure to comply may

result in damage to equipment.

(10) Position air duct (13) on turbocharger (14) with clamp

(15).

(11) Tighten clamp (15) to 21-25 lb-in. (2-3 Nm).

(12) Position turbocharger tube (11) in air duct (13) with

clamp (16).

(13) Tighten clamp (16) to 36-48 lb-in. (4-5 Nm).

(14) Position bracket (17) on engine inlet manifold (18) with

two washers (19) and screws (20).

(15) Tighten two screws (20) to 15-25 lb-ft (20-34 Nm).

(16) Position intake tube (21) on bracket (17) with two

lockwashers (22), screws (23), washers (23.1) and nuts

(23.2).

(17) Tighten two nuts (23.2) to 22-26 lb-ft (29-35 Nm).

Change 1