M1093/M1094 Intake Air Cleaner Assembly Installation. (cont)

TM 9-2320-366-20-3

4-2. INTAKE AIR CLEANER FILTER ELEMENT, AIR CLEANER ASSEMBLY, AND

PARTICLE EXTRACTION TUBE REPLACEMENT (CONT)

(20) Position air compressor intake hose (26) on intake air

cleaner boot (24) with clamp (27).

(21) Tighten clamp (27) to 36-48 lb-in. (4-5 Nm).

(22) Position particle extraction hose (28) on adapter (29)

with clamp (30).

(23) Tighten clamp (30) to 36-48 lb-in. (4-5 Nm).

(24) Connect air filter restriction gauge hose (31) to air flow

sensor (32).

(25) Install connector J106 (33) and dust cap lanyard (34) on

chemical detector mounting bracket (35) with nut (36).

(26) Install dust cap (37) on connector J106 (33).

(27) Install four washers (38) and screws (39) in chemical

detector mounting bracket (35).

4-16