M1093/M1094 Intake Air Cleaner Assembly Installation. (cont)

TM 9-2320-366-20-3

4-2. INTAKE AIR CLEANER FILTER ELEMENT, AIR CLEANER ASSEMBLY, AND

PARTICLE EXTRACTION TUBE REPLACEMENT (CONT)

(3) Position intake air cleaner assembly (5) on mounting

brackets (4).

(4) Position washer (6) and screw (7) in resilient mount (3).

(5) Position three screws (8) and self-locking nuts (9) in

mounting brackets (4).

(6) Tighten screw (7) to 40-52 lb-ft (54-70 Nm).

(7) Tighten three self-locking nuts (9) to 40-52 lb-ft (54-70

Nm).

(8) Position turbocharger intake hose (10) on turbocharger

tube (11) with clamp (12).

(9) Tighten clamp (12) to 36-48 lb-in. (4-5 Nm).

CAUTION

Distance between front edge of air duct and

alternator fan shroud must be no less than

0.5 in. (1.27 cm). Failure to comply may

result in damage to equipment.

(10) Position air duct (13) on turbocharger (14) with clamp

(15).

(11) Tighten clamp (15) to 21-25 lb-in. (2-3 Nm).

(12) Position turbocharger tube (11) in air duct (13) with

clamp (16).

(13) Tighten clamp (16) to 36-48 lb-in. (4-5 Nm).

4-14