Installation. - TM-9-2320-366-20-30523

TM 9-2320-366-20-3

b. Installation.

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area. If

adhesive, solvent, or sealing compound

gets on skin or clothing, wash

immediately with soap and water. Failure

to comply may result in injury to

personnel.

(1) Apply antiseize compound to threads of adapter (1).

(2) Install adapter (1) on 90-degree fitting (2).

(3) Install engine oil sampling hose (3) on adapter (1).

NOTE

Perform steps (4) and (5) on vehicles

equipped with transmission oil cooler tubes.

(4) Install preformed packing (4) on 45-degree fitting (5).

(5) Install 45-degree fitting (5) in transmission oil cooler tube

(6).

NOTE

Perform step (5.1) and (5.2) on vehicles

equipped with transmission oil cooler hoses.

(5.1) Apply antiseize compound to threads of 45-degree fitting

(5).

(5.2) Install 45-degree fitting (5) in transmission oil cooler hose

(6).

(6) Install transmission oil sampling hose (7) on 45-degree

fitting (5).

Change 1

3-17