CONTINUITY TEST - TM-9-2320-366-20-30393

TM 9-2320-366-20-3

CONTINUITY TEST

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter to

connector J31-9.

(3)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(4)

If continuity is not present, repair wire 3028

(para 2-45) or replace WTEC II dashboard

cable assembly (para 7-10) or WTEC III

dashboard cable assembly (para 7-11).

CONTINUITY TEST

(1)

Remove screw and terminal lug TL178

from audible alarm.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter to

connector J31-17.

(4)

Connect negative (-) probe of multimeter to

terminal lug TL178 and note reading on

multimeter.

(5)

If continuity is not present, repair wire 32

(para 2-45) or replace WTEC II dashboard

cable assembly (para 7-10) or WTEC III

dashboard cable assembly (para 7-11).

(6)

If continuity is present, replace audible

alarm (para 7-43).

(7)

Install terminal lug TL178 on audible

alarm with screw.

(8)

Connect connector P31 to connector J31.

(9)

Install instrument panel assembly (para 7-15).

2-2381