 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-3
PRESSURE TEST
(1) Position drain pan under suspension
compression tee fitting.
(2) Disconnect hydraulic hose 510 from
suspension compression tee fitting LH
output port.
(3) Connect STE/ICE-R between hydraulic
hose 510 and suspension compression
tee fitting LH output port.
(4) Start engine (TM 9-2320-366-10-1).
(5) Position SUSPENSION knob to RAISE
(TM 9-2320-366-10-1).
(6) Position FUNCTION SELECT knob
to SUSPENSION (TM 9-2320-366-10-1).
(7) Push and hold PUMP plunger button
(TM 9-2320-366-10-1) and perform
STE/ICE-R Test #51.
(8) If 2,500-4,000 psi (17,238-27,580 kPa) is
not present, go to step 4 of this fault.
(9) If 2,500-4,000 psi (17,238-27,580 kPa) is
present, replace hydraulic hose 510
(para 19-12).
(10) Disconnect STE/ICE-R from hydraulic hose
510 and suspension compression tee fitting
LH output port.
(11) Connect hydraulic hose 510 to suspension
compression tee fitting LH output port.
(12) Repeat steps (2) through (12) on hydraulic
hose 508 and suspension compression tee
fitting RH output port.
Change 1
2-2230.5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals