CONTINUITY TEST - TM-9-2320-366-20-30137

TM 9-2320-366-20-3

CONTINUITY TEST

(1)

Remove instrument panel assembly for access

(para 7-15).

(2)

Disconnect connector clamp from speedometer

connector.

(3)

Disconnect connector PX8 from speedometer.

(4)

Set multimeter to ohms position.

(5)

Connect positive (+) probe of multimeter to

connector J111B.

(6)

Connect negative (-) probe of multimeter to

connector PX8-4 and note reading on

multimeter.

(7)

If continuity is not present, repair wire 1793

(para 2-45) or replace WTEC II dashboard

cable assembly (para 7-10) or WTEC III

dashboard cable assembly (para 7-11).

(8)

Connect connector PX8 to speedometer.

(9)

Connect connector clamp to speedometer

connector.

(10)

Install instrument panel assembly (para 7-15).

2-2127