 |
|||
|
|
|||
|
Page Title:
NO AIR PRESSURE PRESENT AT ALL M1088 REAR AND FIFTH WHEEL GLADHANDS (cont) |
|
||
| ||||||||||
|
|
 TM 9-2320-366-20-2
(1) Loosen air hose 102 at cab floor fitting.
(2) Start engine (TM 9-2320-366-10-1).
(3) Push in TRAILER AIR SUPPLY control
(TM 9-2320-366-10-1).
(4) Check for presence of air at air hose 102.
(5) Shut down engine (TM 9-2320-366-10-1).
(6) If air is not present, go to step 3 of this fault.
(7) If air is present, replace air hose134 (para
11-21).
(8) Tighten air hose 102 at cab floor fitting.
(1) Remove roll pins from knobs of SYSTEM
PARK and TRAILER AIR SUPPLY valves.
(2) Remove SYSTEM PARK and TRAILER AIR
SUPPLY valve knobs.
(3) Unscrew nuts at base of valve stem on each
valve.
(4) Remove six screws and dash plate from
personnel heater.
(5) Pull out TRAILER AIR SUPPLY valve from
personnel heater.
(6) Loosen air hose 102 at TRAILER AIR SUPPLY
valve delivery port.
(7) Start engine (TM 9-2320-366-10-1).
(8) Push in SYSTEM PARK control
(TM 9-2320-366-10-1).
(9) Push in TRAILER AIR SUPPLY valve stem.
(10) Check for presence of air at TRAILER AIR
SUPPLY valve delivery port.
(11) If air is not present, go to step 4 of this
fault.
(12) If air is present, replace air hose 102
(para 11-21).
(13) Shut down engine (TM 9-2320-366-10-1).
(14) Tighten air hose 102 at TRAILER AIR SUPPLY
valve delivery port.
Change 1
2-1976.39
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals