DRIVE SHAFT OR UNIVERSAL JOINT UNUSUALLY NOISY WHEN OPERATING (CONT)

TM 9-2320-366-20-2

(1) Check drive shaft for excessive movement

at universal joints.

(2) If universal joint(s) shows any movement,

replace universal joint (para 9-2 or TM 9-

2320-366-34).

(1) Perform drive shaft hinging inspection

(para 9-4).

(2) Visually inspect drive shaft for damaged

slip yoke, bent tubing, or missing balance

weights.

(3) If drive shaft does not pass hinging

inspection or visual inspection, replace drive

shaft (para 9-2 or TM 9-2320-366-34).

Change 1

2-1827