 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-2
RESISTANCE TEST
(1) Remove two screws and washers from
front grille.
(2) Remove screw and washer from front
grille.
(3) Remove front grille from cab.
(4) Disconnect connector P119 from
connector J119.
(5) Set multimeter to ohms.
(6) Connect positive (+) probe of multimeter
to connector P119m.
(7) Connect negative (-) probe of multimeter
to connector P119s and note reading on
(8) Connect negative (-) probe of multimeter
to all other pins in connector P119, one at
a time, and note reading on multimeter.
(9) Connect negative (-) probe of multimeter
to ground and note reading on multimeter.
(10) Connect positive (+) probe of multimeter
to connector P119s.
(11) Connect negative (-) probe of multimeter
to all other pins in connector P119 (except
P119m), one at a time, and note reading
on multimeter.
(12) Connect negative (-) probe of multimeter
to ground and note reading on multimeter.
(13) If 200-400 ohms resistance in not present
in step 7, or continuity is present in step 8,
9, 11, or 12, notify DS Maintenance.
Change 1
2-1715
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals