Quantcast PRESSURE TEST - TM-9-2320-366-20-20893

 

Click here to make tpub.com your Home Page

Page Title: PRESSURE TEST
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home
   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 56 AND ANY SUB CODE (cont) - TM-9-2320-366-20-20892
Up
TM-9-2320-366-20-2 M1083 Series 5-Ton 6 x 6 Medium Tactical Vehicles (MTV) Manual
Next
WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 13 AND ANY SUB CODE
TM 9-2320-366-20-2
PRESSURE TEST
(1) Remove front and intermediate propeller
shafts (para 9-2).
(2) Position drain pan under pressure tap.
(3) Remove pressure tap plug and preformed
packing from clutch pressure tap indicated
by the sub code. Refer to Table 2-33.
Clutch Pressure Tap.
(4) Connect tube to boss adapter, hose, and
pipe to tube adapter to clutch pressure tap.
(5) Perform STE/ICE-R test #50 (TM 9-4910-
571-12&P).
(6) Start engine (TM 9-2320-366-10-1).
(7) Make shift indicated by sub code. Refer to
Table 2-33. Clutch Pressure Tap.
(8) Accelerate engine until WTEC II TEPSS
displays desired range. Refer to Table
2-33. Clutch Pressure Tap.
(9) Maintain sufficient engine speed to keep
desired transmission range while
assistant notes reading on STE/ICE-R.
(10) Let engine return to idle.
(11) Shift transmission into neutral (TM 9-2320-
366-10-1).
(12) Shut down engine (TM 9-2320-366-10-1).
(13) If one or more of clutches failed to indicate
proper pressure, notify DS Maintenance.
(14) If all clutches indicate proper pressure,
replace WTEC II TEPSS (para 8-2).
(15) Remove pipe to tube adapter, hose, and
tube to boss adapter from clutch pressure
tap.
(16) Position preformed packing and pressure
tap plug in control valve module.
(17) Tighten pressure tap plug to 84-120 lb-in.
(9-14 Nm).
(18) Remove drain pan under pressure tap.
(19) Install front and intermediate propeller
shafts (para 9-2).
(20) Clear diagnostic codes (para 8-4).
Table 2-33. Clutch Pressure Tap
Sub
Sub Code
Pressure
Pressure Readings at Taps
Code
Meaning
at Clutch(s)
00
L Range Test
C3 & C6
215-334
psi
(1480-2300 kPa)
11
1 Range Test
C1 & C5
215-305
psi
(1480-2100 kPa)
22
2 Range Test
C1 & C4
142-203
psi
(980-1400 kPa)
33
3 Range Test
C1 & C3
142-203
psi
(980-1400 kPa)
44
4 Range Test
C1 & C2
142-203
psi
(980-1400 kPa)
55
5 Range Test
C2 & C3
128-189
psi
(880-1300 kPa)
66
6 Range Test
C2 & C4
128-189
psi
(880-1300 kPa)
77
R Range Test
C3 & C5
215-276
psi
(1480-1900 kPa)
Change 1

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.