VOLTAGE TEST - TM-9-2320-366-20-20759

TM 9-2320-366-20-2

WARNING

Remove rings, bracelets, watches,

necklaces, and any other jewelry

before working around vehicle.

Jewelry can catch on equipment

and cause injury or short across

electrical circuit and cause severe

burns or electrical shock.

VOLTAGE TEST

(1)

Remove six screws from auxiliary panel.

(2)

Lift auxiliary panel from auxiliary panel

housing outward to gain access.

(3)

Disconnect connector P906 from blackout

override switch.

(4)

Set multimeter to volts dc.

(5)

Connect positive (+) probe of multimeter to

connector P906-5.

(6)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(7)

If 12 vdc is not present, go to step 3 of this

fault.

2-1567