CONTINUITY TEST - TM-9-2320-366-20-20731

TM 9-2320-366-20-2

CONTINUITY TEST

(1)

Remove kick panel (para 16-3).

(2)

Disconnect connector P912A from connector

J912.

(3)

Set multimeter to ohms.

(4)

Connect positive (+) probe of multimeter to

connector P912A-15.

(5)

Connect negative (-) probe of multimeter to

relay K15 socket 87A and note reading on

multimeter.

(6)

If continuity is not present, repair wire 1811A

(para 2-45) or replace WTEC II dashboard

cable assembly (para 7-10) or WTEC III

dashboard cable assembly (para 7-11).

(7)

If continuity is present, repair wire 1811A

(para 2-45) or replace oil cooler fan cable

assembly (para 7-136).

(8)

Connect connector P912A to connector J912.

(9)

Install kick panel (para 16-3).

2-1539