 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-2
WARNING
Goggles must be worn while operating wrecker
control panel. Blowing dust and debris may
become airborne while engine is running. Failure
to comply may result in injury to personnel.
Wear leather gloves at all times when
handling winch cable. Do not allow cable
to slide through hands even with gloves on.
Broken wires may cause injury.
Never let moving cable slide through hands,
even when wearing gloves. A broken wire
could cut through gloves and cut hands.
Failure to comply may result in injury to
personnel.
OPERATIONAL TEST
(1) Position MAIN WINCH LH FREESPOOL
switch to OFF.
(2) Position MAIN WINCH RH FREESPOOL
switch to ON.
(3) Pull cable to see if RH 30K winch drum free
spools.
(4) If RH 30K winch does not freespool, go to
step 9 of this fault.
(5) Position MAIN WINCH RH FREESPOOL
switch to OFF.
(6) Set engine speed to idle (750 rpm) by
decreasing HAND THROTTLE lever to full
down position.
(7) Position PTO switch to off.
(8) Shut down engine (TM 9-2320-366-10-1).
Change 1
2-1456.5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals