CONTINUITY TEST - TM-9-2320-366-20-20427

TM 9-2320-366-20-2

WARNING

Remove rings, bracelets, watches,

necklaces, and any other jewelry

before working around vehicle.

Jewelry can catch on equipment

and cause injury or short across

electrical circuit and cause severe

burns or electrical shock.

CONTINUITY TEST

(1)

Connect external remote control cable to left or

right remote control cable bulkhead connector.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter on pin

E of remote control cable connector.

(4)

Connect negative (-) probe of multimeter on pin

B of remote control cable connector and note

reading on multimeter.

(5)

If 24 vdc is not present, replace external

remote control cable.

(6)

Disconnect external remote control cable from

left or right remote control cable bulkhead

connector.

(7)

Install cover on left or right remote control cable

bulkhead connector.

2-1303