TM 9-2320-366-20-2
TM
CONTINUITY TEST
(1)
Disconnect external remote control cable from
remote control box.
(2)
(3)
N of connector on remote control box.
(4)
Connect negative (-) probe of multimeter on
pin H of connector on remote control box.
NOTE
Step (5) requires the aid of
an assistant.
(5) Position BOOM UP/DOWN controller to UP
and note reading on multimeter.
(6) If continuity is not present, go to step 4 of this
fault.
(7) If continuity is present, go to step 5 of this fault.
2-1205
Click
here for thousands of PDF manuals
