VOLTAGE TEST - TM-9-2320-366-20-20285

TM 9-2320-366-20-2

WARNING

Remove rings, bracelets, watches,

necklaces, and any other jewelry

before working around vehicle.

Jewelry can catch on equipment

and cause injury or short across

electrical circuit and cause severe

burns or electrical shock. Batteries

can explode from a spark. Battery

acid is harmful to skin and eyes.

Always wear eye protection and

rubber gloves when working with

batteries.

VOLTAGE TEST

(1)

Set multimeter to volts dc.

(2)

Connect positive (+) probe of multimeter to

terminal in right side of fuse holder.

(3)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(4)

If 24 vdc is not present, repair wire from right

side of fuse holder to BT2-E1 (para 2-45) or

replace battery tester (para 7-54).

(5)

If 24 vdc is present, replace battery tester

(para 7-54).

(6)

Install fuse in battery tester fuse holder.

(7)

Close battery tester fuse holder.

(8)

Install battery box cover (TM 9-2320-366-10-2).