CONTINUITY TEST - TM-9-2320-366-20-20281

TM 9-2320-366-20-2

CONTINUITY TEST

(1)

Connect connector P80B to air dryer.

(2)

Disconnect connector P80 from connector J80A.

(3)

Set multimeter to ohms.

(4)

Connect positive (+) probe of multimeter to

connector P80-1.

(5)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(6)

If continuity is not present, repair wire 3009

in start and charging cable assembly

(para 2-45) or replace start and charging cable

assembly (para 7-132).

(7)

If continuity is present, repair wire 3009 in dump

cable assembly (para 2-45) or replace dump

cable assembly (para 7-124).

(8)

Connect connector P80 to connector J80A.

2-1157