CONTINUITY TEST - TM-9-2320-366-20-20203

TM 9-2320-366-20-2

CONTINUITY TEST

(1)

Remove seven screws and washers from

cover.

(2)

Remove screw, washer, cover, and nut from

WTEC II VIM.

(3)

Remove relay SF04 from WTEC II VIM.

(4)

Set multimeter to ohms.

(5)

Connect positive (+) probe of multimeter to

relay SF04 terminal 30.

(6)

Connect negative (-) probe of multimeter to

relay SF04 terminal 87a and note reading on

multimeter.

(7)

If continuity is not present, replace relay SF04

in WTEC II VIM (para 8-6).

CONTINUITY TEST

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter to

relay SF04 terminal 86.

(3)

Connect negative (-) probe of multimeter to

relay SF04 terminal 85 and note reading on

multimeter.

(4)

If continuity is not present, replace relay SF04

in WTEC II VIM (para 8-6).

(5)

Install relay SF04 in WTEC II VIM.

(6)

Install cover on WTEC II VIM with nut, washer,

and screw.

(7)

Install seven washers and screws in cover.

2-1079