CONTINUITY TEST - TM-9-2320-366-20-20145

TM 9-2320-366-20-2

CONTINUITY TEST

(1)

Disconnect connector P210 from connector

J210.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter to

connector P913-14.

(4)

Connect negative (-) probe of multimeter to

connector J210-4 and note reading on

multimeter.

(5)

If continuity is not present, repair wire 2019

(para 2-45) or replace auxiliary panel cable

assembly (para 7-58).

(6)

If continuity is present, replace WTEC II relay

SF02 (para 8-6).

(7)

Connect connector P913 to connector J913.

(8)

Connect connector J210 to connector P210.

(9)

Install personnel heater (para 18-9).

2-1031