VOLTAGE TEST - TM-9-2320-366-20-20125

TM 9-2320-366-20-2

WARNING

Remove rings, bracelets, watches,

necklaces, and any other jewelry

before working around vehicle.

Jewelry can catch on equipment

and cause injury or short across

electrical circuit and cause severe

burns or electrical shock.

VOLTAGE TEST

(1)

Disconnect connector P217 from PTO.

(2)

Set multimeter to volts dc.

(3)

Connect positive (+) probe of multimeter to

connector P217-B.

(4)

Connect negative (-) probe of multimeter to

ground.

(5)

Start engine (TM 9-2320-366-10-1).

(6)

Position PTO switch to on (TM 9-2320-366-10-1)

and note reading on multimeter.

(7)

If 24 vdc is not present, go to step 3 of this

fault.

(8)

Position PTO switch to off

(TM 9-2320-366-10-1).

(9)

Shut down engine (TM 9-2320-366-10-1).

2-1011