CONTINUITY TEST - TM-9-2320-366-20-10997

TM 9-2320-366-20-1

CONTINUITY TEST

(1) Disconnect batteries (para 7-57).

(2) Set multimeter to ohms.

(3) Connect positive (+) probe of multimeter to

relay K20 terminal 85 on PDP.

(4) Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(5) If continuity is not present, repair wire 3054

from relay K20 terminal 85 on PDP to

terminal board TB2 position 44 on PDP

(para 2-45) or replace WTEC II dashboard

cable assembly (para 7-10) or WTEC III

dashboard cable assembly (para 7-11).

(6) If continuity is present, replace relay K20

(para 7-9).

(7) Install relay K20 in PDP.

(8) Install PDP cover (para 16-2).

Change 1

2-604.65