Quantcast VOLTAGE TEST - TM-9-2320-366-20-10923

 

Click here to make tpub.com your Home Page

Page Title: VOLTAGE TEST
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home
   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
M1083/M1084/M1090/M1092/M1093/M1094 SIDE AND/OR REAR MARKER LIGHT(S) DO NOT ILLUMINATE (Cont) - TM-9-2320-366-20-10922
Up
TM-9-2320-366-20-1 M1083 Series 5-Ton 6 x 6 Medium Tactical Vehicles (MTV) Manual
Next
M1083/M1084/M1090/M1092/M1093/M1094 SIDE AND/OR REAR MARKER LIGHT(S) DO NOT ILLUMINATE (Cont) - TM-9-2320-366-20-10924
TM 9-2320-366-20-1
WARNING
Remove rings, bracelets, watches, necklaces,
and any other jewelry before working around
vehicle. Jewelry can catch on equipment and
cause injury or short across electrical circuits
and cause severe burns or electrical shock.
CAUTION
Use care when testing electrical connectors.
Do not damage connector pins or sockets
with multimeter probes. Failure to comply
may result in damage to equipment.
NOTE
Inspect connector pins/sockets for damage,
corrosion, and serviceability. Check that
connector pins are not pushed back and
are capable of making good contact.
VOLTAGE TEST
(1) Disconnect connector P54 from LH rear
marker light connector.
(2) Set multimeter to volts DC.
(3) Connect positive (+) probe of multimeter
to connector P54.
(4) Connect negative (-) probe of multimeter
to ground.
(5) Position main light switch to SER DRIVE
(TM 9-2320-366-10-1) and note reading
on multimeter.
(6) If 12 VDC is not present, repair wire 489
from connector P54 to splice E15
(para 2-45) or replace rear lights cable
assembly (para 7-84).
(7) Position main light switch to OFF
(TM 9-2320-366-10-1).
(8) Connect LH rear marker light connector
to connector P54.
Change 1
2-600.7

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.