 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-1
TM
CONTINUITY TEST
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
lamp socket.
(3)
Connect negative (-) probe of multimeter to
composite front light housing and note reading
on multimeter.
(4)
If continuity is not present, replace composite
front light assembly (para 7-40).
(5)
If continuity is present, repair wire 3091
(para 2-45) or replace front lights cable
assembly (para 7-82).
(6)
Install lamp in socket.
(7)
Install preformed packing and cover on housing
with five screws.
CONTINUITY TEST
(1)
Remove instrument panel assembly for access
(para 7-15).
(2)
Disconnect connector PX15 from main light
switch.
(3)
Set multimeter to ohms.
(4)
Connect positive (+) probe of multimeter to
main light switch terminal L.
(5)
Connect negative (-) probe of multimeter to
main light switch terminal F.
(6)
Position main light switch auxiliary lever to
PARK (TM 9-2320-366-10-1) and note reading
on multimeter.
(7)
If continuity is not present, replace main light
switch (para 7-17).
(8)
If continuity is present, repair wire 491
(para 2-45) or replace WTEC II dashboard cable
assembly (para 7-10) or WTEC III dashboard
cable assembly (para 7-11).
(9)
Connect connector PX15 to main light switch.
(10)
Install instrument panel assembly (para 7-15).
2-559
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals