CONTINUITY TEST - TM-9-2320-366-20-10767

TM 9-2320-366-20-1

CONTINUITY TEST

(1)

Remove personnel heater for access (para 18-9).

(2)

Disconnect connector P913 from connector

J913.

(3)

Set multimeter to ohms.

(4)

Connect positive (+) probe of multimeter to

PX7-10.

(5)

Connect negative (-) probe of multimeter to

J913-13 and note reading on multimeter.

(6)

If continuity is not present, repair wire 2021

(para 2-45) or replace WTEC II dashboard

cable assembly (para 7-10) or WTEC III

dashboard cable assembly (para 7-11).

(7)

Connect lighted indicator display to connector

PX7.

(8)

Position lighted indicator display in instrument

panel assembly with four screws.

(9)

Tighten four screws to 6-10 lb-in. (1 Nm).

(10)

Connect batteries (para 7-57).

2-479