e11. ENGINE OIL PRESSURE GAGE DOES NOT OPERATE OR IS INACCURATE (CONT)
Continuity Test or
VOLTS gage OK.
STE/ICE-R Test #91
Engine oil level OK.
Is continuity present from
REASON FOR QUESTION
Engine oil pressure indicator
connector PX6 pin 4 to a
goes out after engine starts.
If continuity is not present, wire
known good ground?
Engine oil pressure transmitter
36 from connector P31 socket
11 to connector P32 socket 2 is
faulty. If continuity is present,
wire 36 from connector J31 pin
Faulty engine control cable
11 to connector PX6 pin 4 is
Faulty WTEC II dashboard cable
Faulty WTEC III dashboard
Repair wire 36 from connector P31 socket
11 to connector P32 socket 2 (para 2-45) or
engine control cable assembly (para 7-80).
Repair wire 36 from connector J31 pin 11 to
connector PX6 pin 4 (para 2-45) or replace WTEC II
dashboard cable assembly (para 7-10) or WTEC III
dashboard cable assembly (para 7-11).