e6. ENGINE CRANKS BUT DOES NOT START (CONT)
on following page.
Continuity Test or
Fuel quantity OK.
STE/ICE-R Test #91
Fuel/water separator primed.
Is continuity present from
REASON FOR QUESTION
Air cleaner hose or tube OK.
relay K19 socket 87A to
Start inhibit pushbutton switch
If continuity is not present,
connector J31 pin 14?
wire 54 from relay K19 socket
Relay K19 OK.
87A on PDP to connector J31
pin 14 is faulty. If continuity
is present, wire 54 from
Faulty dashboard cable
connector P31 socket 14 to
terminal lug TL28 is faulty.
Faulty engine control cable
Repair wire 54 from relay K19 socket
87A on PDP to connector J31 pin 14
(para 2-45) or replace WTEC II dashboard
cable assembly (para 7-10) or WTEC III
dashboard cable assembly (para 7-11).
Repair wire 54 from connector P31
socket 14 to terminal lug TL28 (para 2-45)
or replace engine control cable assembly