 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-1
WARNING
Remove rings, bracelets, watches, necklaces,
and any other jewelry before working around
vehicle. Jewelry can catch on equipment and
cause injury or short across electrical circuits,
or cause severe burns or electrical shock.
VOLTAGE TEST
(1) Install relay test wire in relay K26
socket 87 on PDP.
(2) Install relay K26 in PDP.
(3) Set multimeter to volts DC.
(4) Connect positive (+) probe of multimeter
to relay test wire.
(5) Connect negative (-) probe of multimeter to
ground.
(6) Position master power switch to on
(TM 9-2320-366-10-1) and note reading on
multimeter.
(7) If 24 VDC is not present, replace relay K26
(para 7-9).
(8) If 24 VDC is present, repair wire 1691 from
relay 26 socket 87 on PDP to relay K1
socket 86 on PDP (para 2-40) or replace
WTEC III dashboard cable assembly
(para 7-11).
(9) Position master power switch to off
(TM 9-2320-366-10-1).
(10) Remove relay K26 from PDP.
(11) Remove relay test wire from relay K26
socket 87 on PDP.
(12) Install relay K26 in PDP.
(13) Install power distribution panel (PDP) cover
(para 16-2).
Change 1
2-243
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals