ENGINE CRANKS BUT DOES NOT START OR ENGINE STALLS AFTER STARTING (CONT)

TM 9-2320-366-20-1

(1) Disconnect fuel transfer hose from

fuel/water separator.

(2) Depress button on fuel/water separator

as many times as necessary to get a

steady stream of clear fuel.

(3) If fuel does not flow from fuel/water

separator, go to step 12 of this fault.

(4) Connect fuel transfer hose to fuel/water

separator.

(1) Disconnect fuel transfer hose from fuel

transfer pump.

(2) Depress button on fuel/water separator

as many times as necessary to get a

steady stream of clear fuel.

(3) If fuel does not flow from fuel transfer hose,

replace fuel transfer hose (para 4-9).

(4) Connect fuel transfer hose to fuel transfer

pump.

Change 1

2-114.1