Installation. - TM-9-2320-279-20-11060

9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-95. PTO INDICATOR LIGHT ASSEMBLY, SWITCH, AND HARNESS

REMOVAL/INSTALLATION (CONT).

(2) Pull out socket (3) from housing (4).

(3) Remove lamp (5) from socket (3).

NOTE

Tag and mark wires before disconnecting

or removing.

(4) Remove two electrical butt

connectors (6).

(5) Remove lens (7), nut (8), housing (4),

and lockwasher (9) from heater

compartment cover (2).

(6) Remove force ring (10) from lens (7).

(7) Remove two screws (11), wire (12), and

harness (13) from PTO switch (14).

(8) Disconnect harness (13) from vehicle

wiring.

(9) Remove nut (15) from PTO switch (14).

Remove PTO switch from heater

compartment cover (2).

b. Installation.

(1) Install Pill switch (1) on heater

compartment cover (2) with nut (3).

(2) Install wire (4) and harness (5) on PTO

switch (1) with two screws (6).

(3) Connect harness (5) to vehicle wiring.

(4) Install force ring (7) into lens (8).

(5) Install lockwasher (9), housing (10),

nut (11), and lens (8) on heater

compartment cover (2).

(6) Connect two wires (4 and 12) to

harness (5).

(7) Connect two wires (13).

(8) Install lamp (14) into socket (15) and

install socket into housing (10).

7-356