Assembly-continued - TM-9-2320-279-20-11051

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

Install two grommets (8) in box (3).

(3)

Apply grease to grommets (8) and two

(4)

wires (9 and 10) and install wires

through grommets.

Connect two wires (9 and 10) to

(5)

receptacle (1) with two lockwashers (11)

and screws (12).

NOTE

If a slave cable with a small receptacle plug

is being used, the retention arm needs to

be bent 35. Do step (5.1).

(5.1) If slave cable with a small receptacle

plug is being used, bend retention

arm (12.1) 35.

(5.2) Install arm (12.1) and spring (12.21 on

base (12.3) with screw (12.4) and

nut (12.5).

(6) Install gasket (13) in cover (14).

(7) Install cover (14) and retention

device (14.1) on box (3) with four

screws (15).

7-348.1/(7-348.2 blank)

Change 3