Installation. - TM-9-2320-279-20-11009

9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-87. TANK LEVEL lNDICATOR ADJUSTER REMOVAL/lNSTALLATlON/ADJUSTMENT (M978)

(CONT).

NOTE

Both ends of hoses are removed the same way.

(8) Remove nut (22), hose (13), insert (23), compression fitting (24), adapter (25), and fitting (26)

from wires (14) and tank level indicator adjuster (20).

(9) Remove nut (27), hose (8), insert (28), compression fitting (29), adapter (30), adapter (31), and

fitting (32) from wires (10) and tank level indicator adjuster (20).

b. Installation.

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing. To avoid injury or death, keep away

from open fire and use in well-ventilated area. If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

(1) Apply pipe thread sealing compound and install fitting (1), adapter (2), and adapter (3) over

wires (4) and on tank level indicator adjuster (5).

(2) Apply pipe thread sealing compound and install fitting (6) and adapter (7) over wires (8) and on

tank level indicator adjuster (5).

NOTE

Both ends of hoses are installed the same way.

Install nut (9) and compression fitting (10) on hose (11) and install insert (12).

(3)

Thread wires (4) through hose (11) and install nut (9) on adapter (3).

(4)

Install nut (13) and compression fitting (14) on hose (15) and install insert (16).

(5)

Thread wires (8) through hose (15) and install nut (13) on adapter (7).

(6)

7-313