 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
WARNING
Adhesives, solvents, and sealing compounds can
burn easily, can give off harmful vapors, and are
harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in
well-ventilated area. If adhesive, solvent, or
sealing compound gets on skin or clothing, wash
immediately with soap and water.
(9)
Coat threads of pipe nipples (17 and 18)
with pipe thread sealing compound and install
into elbow (19) and control junction box (20).
CAUTION
To avoid damage to wires, do not connect
wires until indicator box has been installed
on pipe.
NOTE
Perform step (10) if working on a
Model A vehicle.
Perform step (11) if working on a
Model B vehicle.
(10) Install adapter (21) in indicator
box (15) and feed three
wires (3, 4, and 13) into control
junction box (20).
(11) Apply pipe thread sealing
compound to threads of pipe
nipple (17) and install
adapter (21) and indicator
box (15) on pipe nipple (17).
NOTE
Perform step (12) if working on a
Model A vehicle.
Perform step (13) if working on a
Model B vehicle.
(12)
Install three wires (3, 4, and 13)
and three screws (22).
(13)
Install four wires (3, 4, 8, and 14)
and four screws (22).
(14)
Install bracket (23) with two
screws (24 and 25),
lockwashers (26 and 27) (Model A only)
and nut (28).
Change 5
7-310.5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals