Removal-continued - TM-9-2320-279-20-11002

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-86.1.

TLI TANK LEVEL INDICATOR GAGE AND BRACKET REMOVAL/

INSTALLATION (M978) (CONT).

NOTE

Tag and mark all wires before

disconnecting.

There are two models of vehicle

when performing this procedure.

Model B incorporates a blue ground

wire to the gage. Model A does not

incorporate this blue ground wire.

Perform step (2) if working on a

Model A vehicle.

Perform step (3) if working on a

Model B vehicle.

(2)

Remove three screws (5) and

wires (6, 7, and 8) from control

junction box (4).

(3)

Remove four screws (5) and

wires (6, 7, 8, and 9) from control

junction box (4).

(4)

Remove two screws (10 and 11),

lockwashers (12 and 13) (Model A

only), nut (14), and bracket (15).

(5)

Remove indicator box (16) with

adapter (17) from pipe

nipple (18).

(6)

Remove adapter (17) from

indicator box (16).

(7)

Remove pipe nipple (18), elbow (19), and

pipe nipple (20) from control junction

box (4).

7-310.2

Change 5