Installation-continued - TM-9-2320-279-20-10999

9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-86. TLI TANK LEVEL INDICATOR GAGE AND BRACKET REMOVAL/INSTALLATION (M978)

(CONT).

WARNING

Adhesives, solvents, and sealing compounds can

burn easily, can give off harmful vapors, and are

harmful to skin and clothing. To avoid injury or

death, keep away from open fire and use in

well-ventilated area. If adhesive, solvent, or

sealing compound gets on skin or clothing, wash

immediately with soap and water.

(7) Coat threads of pipe nipples (16 and 17) with

pipe thread sealing compound and install into

elbow (18) and junction-box (19).

CAUTION

To avoid damage to wires, do not

connect wires until indicator box

has been installed on pipe.

(8) Install adapter (20) in indicator

box (14) and feed wire (3),

wire (4), and wire (13) into

control junction box (19).

(9) Apply pipe thread sealing

compound to threads of pipe

nipple (18) and install

adapter (20) and indicator

box (14) on pipe.

(10) Install three wires (3, 4, and 13)

and three screws (22).

(11) Install bracket (23) with two

screws (24 and 25),

lockwashers (26 and 27), and

nut (28).