 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
a.
Removal.
NOTE
Tag and mark wires before removing.
(1)
Remove nut (1), lockwasher (2),
washer (3), and wire (4) from oil
pressure sending unit (5).
(2)
Remove oil pressure sending unit (5)
from manifold (6).
b.
Installation.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(1)
Coat threads of oil pressure sending
unit (5) with pipe thread sealing
compound, install on manifold (6), and
tighten.
NOTE
Apply electrical sealant to exposed wire
connectors after installing connectors.
(2)
Install wire (4), washer (3), and
lockwasher (2) on oil pressure sending
unit (5).
(3)
Install nut (1) and tighten.
c.
Follow-on Maintenance.
(1)
Connect batteries (para 7-91).
(2)
Start engine, check operation of oil
pressure sending unit, and check for
leaks (TM 9-2320-279-10).
(3)
Shut off engine (TM 9-2320-279-10).
(4)
Install engine side panel
(TM 9-2320-279-10).
(5)
Close engine cover (TM 9-2320-279-10).
END OF TASK
Change 5
7-291
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals