Installation. - TM-9-2320-279-20-10974

9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

(6) Remove two screws (14), one socket (15), and

grommet (16).

(7) Remove boot (17) and switch (18) from base (4).

(8) Cut wire (19) between switch (18) and

socket (15).

(9) Remove three adapters (20).

b. Installation.

NOTE

Do steps (1) through (9) only when entire light

. ..

assembly has been removed. Otherwise, do

step (9) only.

(1) Install three adapters (1) in base (2).

(2) Install grommet (3) on wire (4).

(3) Connect wire (4) between switch (5) and

socket (6) using butt connector.

(4) Install switch (5) in base (2) with boot (7).

7-284