 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM
9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
(3) Remove two nuts (6),
lockwashers (7), screws (8),
marker light (3), and
gasket (9) from mount (10).
(4) Remove nut (11),
tubing (12), and wire (5)
from elbow (13).
(5) Remove elbow (13) from
marker light (3).
b. Installation.
NOTE
Red and amber marker lights are
q
installed the same way.
Do steps (1) through (6) only if entire
q
marker light assembly has been
removed. Otherwise, do steps (6) and (7)
only.
(1) Install elbow (1) on marker light (2).
(2) Push wire (3) through elbow (1) and
install tubing (4) and nut (5) on elbow.
(3) Install gasket (6) and marker light (2)
with two screws (7), lockwashers (8),
and nuts (9).
(4) Connect wire (3) using electrical butt
connector.
(5) Install preformed packing (10).
(6) Install lamp (11) in marker light (2).
(7) Install lens (12).
c. Follow-on Maintenance.
(2) Check operation of marker lights
(TM 9-2320-279-10).
END OF TASK
7-278
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals