 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
(6)
Remove three locknuts (15), washers
(16), screws (17), gasket (18), clamp
(19), and beacon light assembly (5) from
mount (20).
(7)
Remove spring clip (21), insulator (22),
grommet (23), and grommet (24) from
beacon light assembly (5).
(8)
Remove grommet (24) and clamp (19)
from wire (25).
(9)
Remove two nuts (26), lockwashers (27),
washers (28), screws (29), and mount (20).
b.
Installation.
NOTE
Left and right beacon light
assemblies are installed the same
way.
Install right side mount so that
cutout on bottom faces forward. Left
side mount does not have cutout.
(1)
Install mount (1) with two screws (2),
washers (3), lockwashers (4), and nuts (5).
(2)
Install clamp (6) and grommet (7) on
wire (8).
(3)
Install grommet (9), insulator (10), spring
clip (11), grommet (7), and gasket (12) on
beacon light assembly (13).
(4)
Install clamp (6) and beacon light assembly
(13) on mount (1) with three screws (14),
washers (15), and locknuts (16).
Change 4
7-270.5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals