Installation. - TM-9-2320-279-20-10920

9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-67.1. REAR SIDE CLEARANCE MARKER LIGHTS REMOVAL/INSTALLATION (M984E1)

(CONT).

(4) Remove two screws (8) and lens (9) from lampholder (10).

(5) Remove four nuts (11), lockwashers (12), screws (13),

lampholder (10), and gasket (14) from fender assembly (15).

b. Installation.

(1) Install gasket (1) and lampholder (2) on fender (3) with four

screws (4), lockwashers (5), and nuts (6).

(2) Install lens (7) on lampholder (2) with two screws (8).

(3) Install connector (9) and grommet (10) on

cover (11).

(4) Connect wire (12) to connector (9).

(5) Install cover (11) with three screws (13),

lockwashers (14), and nuts (15).

c. Follow-on Maintenance.

(1) Connect batteries (para 7-91).

(2) Check operation of rear side clearance lamps (TM 9-2320-279-10).

END OF TASK

7-238