Control Box Relays Removal.

9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

NOTE

Do step (6) for winch remote control connector.

(6) Install screw (6) and cap and chain (7) on

winch remote control connector (3). Install

cap and chain on connector.

(7) Connect cable connectors (8) to

connectors (3).

(8) Close cover (9) and tighten six brackets (10)

and screws (11).

g. Control Box Relays Removal.

(1) Loosen six screws (1), brackets (2), and

open cover (3).

NOTE

Both relays are removed the same way.

Tag and mark wires before removing.

(2) Disconnect connector (4) from relay (5).

(3) Remove four wires (6) from

connector (4).

7-177