Control Box Installation.

9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-52.1. CONTROL BOX REMOVAL/REPAIR/INSTALLATION (M984E1) (CONT).

NOTE

Clips and plastic cable ties are removed as

necessary.

(2) Remove two locknuts (4), washers (5),

and screws (6) from bracket (7).

(3) Remove two locknuts (8), washers (9),

clamps (10), screws (11), and remove

control box (12) from bracket (13).

b. Control Box Installation.

(1) Install control box (1) on bracket (2)

with two screws (3), clamps (4),

washers (5), and locknuts (6).

(2) Install two screws (7), washers (8), and

locknuts (9) on bracket (10).

(3) Connect three connectors (11, 12,

and 13).