Installation. - TM-9-2320-279-20-10806

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-47. MAIN JUNCTION BOX ASSEMBLY REMOVAL/INSTALLATION (CONT).

b. Installation.

(1) Install main terminal board (1)

in main junction box (2) with

two screws (3), lockwashers (4),

and nuts (5).

(2) Install terminal board (6) with

screw (7), lockwashers (8), and

nut (9).

WARNING

Adhesives, solvents, and sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to

skin and clothing. To avoid injury or

death, keep away from open fire and

use in well-ventilated area. If adhesive,

solvent, or sealing compound gets on

skin or clothing, wash immediately

with soap and water.

Apply silicone adhesive-sealant over screw heads (3 and 7).

(3)

Install main junction box (2) on

(4)

pump module with two

screws (9), lockwashers (10), and

nuts (11).

Apply sealing compound to

(5)

threads of adapter (12).

Install four wires (13),

(6)

adapter (12), and nut (14) in

main junction box (2).

Install four wires (13) on

(7)

terminal board (1) with four

screws (15).

7-146

Change 3