MAIN LIGHT SWITCH REMOVAL/INSTALLATION.

9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-41. MAIN LIGHT SWITCH REMOVAL/INSTALLATION.

This task covers:

b. Installation

a. Removal

c. Follow-on Maintenance

INITIAL SETUP

References

Models

None

All

Equipment Condition

Test Equipment

None

Condition Description

TM or Para

Batteries disconnected.

Special Tools

Para 7-91

None

Special Environmental Conditions

Supplies

None

General Safety Instructions

Personnel Required

None

MOS 63S, Heavy wheel vehicle mechanic

a. Removal.

(1) Remove eight screws (1) and side

panel (2).

(2) Disconnect plug (3) from main light

switch (4).

(3) Remove three screws (5), washers (6),

knobs (7), and washers (8) from main

light switch (4).

(4) Remove four screws (9) and main light

switch (4) from side panel (2).

b. Installation.

(1) Install four screws (9) and main light

switch (4) in side panel (2).

(2) Install three screws (5), washers (6),

knobs (7), and washers (8).

(3) Connect plug (3) to back of main light

switch (4).

(4) Install side panel (2) and make sure all

wires are behind side panel.

(5) Install and tighten eight screws (1).

c. Follow-on Maintenance.

(1) Connect batteries (para 7-91).

(2) Check operation of lights

(TM 9-2320-279-10).

END OF TASK

7-117