SPEEDOMETER/ODOMETER REMOVAL/INSTALLATION.

9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-26. SPEEDOMETER/ODOMETER REMOVAL/INSTALLATION.

This task covers:

c. Follow-on Maintenance

a. Removal

b. Installation

INITIAL SETUP

References

Models

None

All

Equipment Condition

Test Equipment

None

Condition Description

TM or Para

Instrument panel removed.

Para 7-19

Special Tools

None

Special Environmental Conditions

None

Supplies

Tags, identification, Item 48, Appendix C

General Safety Instructions

None

Personnel Required

MOS 63S, Heavy wheel vehicle mechanic

a. Removal.

(1) Pull light socket (1) from

speedometer/odometer (2).

NOTE

Tag and mark wires before disconnecting.

(2) Loosen four screws (3) and disconnect

wires (4) from back of

speedometer/odometer (2).

(3) Remove two nuts (5), lockwashers (6),

wires (7), and bracket (8).

(4) Remove speedometer/odometer (2) from

instrument panel (9).

b. Installation.

(1) Install speedometer/odometer (2) and

bracket (8) on instrument panel (9).

(2) Connect four wires (4) on

speedometer/odometer (2). Tighten four

screws (3).

(3) Install two wires (7) with

lockwashers (6) and nuts (5).

(4) Push light socket (1) in

speedometer/odometer (2).

c. Follow-on Maintenance.

(1) Install instrument panel (para 7-19).

(2) Start engine (TM 9-2320-279-10).

(3) Operate vehicle and check operation of speedometer/odometer (TM 9-2320-279-10).

(4) Shut off engine (TM 9-2320-279-10).

END OF TASK

7-92