 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
7-11.
ENGINE HIGH IDLE BOX CONNECTOR SWITCHES AND BRACKET
REMOVAL/lNSTALLATlON (CRANE MOUNTED) (M984, M985E1) (CONT).
NOTE
There are two models of wiring harnesses. Model A has no boot. Model B has a boot.
Perform steps (13.1 and 15.1) for Model B only.
(13.1) Slide back boot (28.1) from
connector (2).
(14) Remove four pins (29) from
connector (2).
(15) Remove four pins (29) from wires (30).
(15.1) Remove boot (28.1) from wires (30).
(16) Cut two electrical butt connectors (31).
(17) Loosen two caps (32) and slide
rings (33) and grommets (34) back on
wire harnesses (35 and 36).
(18) Remove two wire harnesses (35 and 36)
from ENGINE HIGH IDLE box (9).
(19) Remove four screws (37),
lockwashers (38), and ENGINE HIGH
IDLE box (9) from bracket (39).
(20) Remove two nuts (40),
lockwashers (41), screws (42), and
bracket (39) from valve bank body
bracket (43).
7-36
Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals